Eden ValleyBathrooms & Plumbing · Carlisle
Mark's mobile rings first Call 01228 587 745
Completed jobs6 here, with prices paid
More on town pagesPenrith · Keswick · Brampton
AreasCA1–CA12 · NE49
BaseKingstown · CA3 0HA

Completed Bathrooms, Wetrooms & Unvented Cylinders Across Carlisle & the Eden Valley.

Six recent jobs with the full scope, the time on site and the total fitted cost each customer paid. Every one built by Mark and Ryan from our Kingstown base.

Call 01228 587 745 Book a Free Home Survey
Mark's mobile rings firstSurveys & installations Mon–Fri 8am–6pm, Sat 9am–1pm · Emergency leaks & cylinder call-outs 7 days, 8am–8pm
Finished level-access wetroom in Stanwix: honed limestone-effect porcelain, frameless glass screen, brushed brass rainfall shower and a wall-hung oak vanity
#job-01Level-access wetroom · Stanwix, Carlisle
  1. 310+Completed installations across Cumbria
  2. £24,255Paid in total across the six jobs below
  3. 10-YearWritten no-leak warranty on every wetroom, plus 5 years on our workmanship
  4. 4.9 ★Google rating from 74 reviews

Job list

Tap a job to jump to its spread

Six completed jobs with postcode, time on site and total fitted cost
No.ProjectPostcodeTime on siteFitted cost
#job-01Level-access wetroom, StanwixCA3 99 working days£5,850
#job-02Family bathroom & freestanding suite, WetheralCA4 810 working days£6,900
#job-03210L Megaflo & 22mm mains upgrade, BramptonCA8 11 working day£1,890
#job-04Leaking en-suite re-tank & rebuild, DalstonCA5 76 working days£3,850
#job-05Accessible bungalow wetroom, PenrithCA11 88 working days£5,650
#job-06Same-day thermostatic valve rebuild, DalstonCA5 775 minutes£115
6 jobs · 5 postcode areasTotal fitted value£24,255

Showing all 6 projects

Finished level-access wetroom in a Stanwix Edwardian semi: honed limestone-effect porcelain on the floor and walls, frameless glass screen, brushed brass rainfall shower and grab rail, linear drain and a wall-hung oak vanity beside a sash window
#job-01Level-access wetroom · Stanwix, Carlisle

#job-01 · Walk-in wetroom · CA3 9

Stanwix, Carlisle (CA3 9) — Edwardian Semi Level-Access Wetroom Conversion

Helen's mum could no longer step over the side of a high acrylic bath. Mark and Ryan turned the Edwardian bathroom into a flush, step-free wetroom: tanked first, flood-tested, then tiled.

Total fitted cost
£5,850
Duration
9 working days
Category
Walk-in wetroom

Scope breakdown

  1. Strip-outRemoved the high-step acrylic bath, curtain rail and cracked tiles. Every bag of rubble left site the same afternoon.
  2. Floor structureReinforced the joists and overlaid 22mm marine ply, screwed down so the floor cannot flex under heavy porcelain.
  3. FallsLaid a 1:60 laser-levelled screed former that carries every drop of water to the linear drain.
  4. TankingFull Schlüter-KERDI-200 membrane across the floor and up the walls, every seam lapped and taped, then a 24-hour flood test before a single tile went down.
  5. Tiling600×600mm R11 honed limestone-effect porcelain on walls and floor, non-slip underfoot even when wet.
  6. Screen & brassware10mm frameless glass screen, brushed brass thermostatic rainfall shower and a grab rail set to Mum's height.
  7. VanityWall-hung oak vanity with a brushed brass mixer, leaving the floor clear and easy to clean.
“Mark and Ryan ripped out our tired 1990s bathroom in Stanwix (CA3) and built a walk-in wetroom for my mum. They tanked the entire floor and walls, laid non-slip porcelain tiles, and took every bag of rubble away the same afternoon. Spotless work.”
★★★★★Helen Graham · Stanwix, Carlisle (CA3) · Google review · 14 Sep 2026
Start a wetroom like this →

See how we make a wetroom 100% waterproof →

Wetheral family bathroom with a white double-ended freestanding bath beneath a sash window, a floor-standing brushed brass filler, a frameless walk-in rainfall shower and a twin-basin warm oak vanity
#job-02Family bathroom · Steele's Bank, Wetheral

#job-02 · Family bathroom · CA4 8

Steele's Bank, Wetheral (CA4 8) — Master Family Bathroom & Freestanding Suite

An Edwardian family house above the River Eden. The bathroom was taken back to bare brick and rebuilt around a freestanding bath beneath the sash window, with a separate walk-in shower.

Total fitted cost
£6,900
Duration
10 working days
Category
Family bathroom

Scope breakdown

  1. Strip-out to brickOld suite, tiles and plaster removed back to bare brick, so nothing tired stays hidden behind the new finish.
  2. New 22mm feedsFresh 22mm hot and cold feeds in soldered copper, clipped and pressure-tested before boarding.
  3. Freestanding bathDouble-ended freestanding bath centred beneath the sash window, with a floor-standing brushed brass filler.
  4. Walk-in rainfall enclosureSeparate frameless walk-in shower with a rainfall head, Schlüter-KERDI tanked across the whole shower zone.
  5. Oak vanityTwin-drawer warm oak vanity, wall-hung, with double basins and brushed brass wall-mounted taps.
  6. Underfloor heatingElectric underfloor heating mat beneath the porcelain, on its own thermostat.
  7. Part P LED lightingLED mirror and downlights wired by our Part P-registered electrician partner, included in the price.
Start a bathroom like this →
210-litre white unvented cylinder in a Brampton cottage, with clipped 22mm copper pipework, a white potable expansion vessel, brass inlet controls with a pressure gauge, a tundish and an exposed red-sandstone wall
#job-03210L Megaflo Eco · Main Street, Brampton

#job-03 · Unvented cylinder · CA8 1

Main Street, Brampton (CA8 1) — 210L Heatrae Sadia Megaflo Unvented Cylinder & 22mm Mains Upgrade

A 19th-century red-sandstone cottage where two showers fought over a gravity tank in the loft. Fitted and commissioned in one day by Mark, BPEC G3 certified.

Total fitted cost
£1,890
Duration
1 working day
Category
Unvented cylinder

Shower flow before6.5L/min

Shower flow after22.4L/min

Measured at the upstairs shower before strip-out and again at commissioning.

Scope breakdown

  1. DecommissionedDrained down and removed the loft header tank and the noisy brass shower pump.
  2. 22mm cold mainUpgraded the incoming cold feed to 22mm copper from the stopcock.
  3. CylinderFitted and commissioned a 210L Heatrae Sadia Megaflo Eco unvented cylinder.
  4. ExpansionWhite potable expansion vessel on the cold inlet.
  5. Inlet controlsBalanced pressure-reducing valve set at 3.0 bar, so hot and cold arrive at the same pressure.
  6. Safety dischargeTundish and copper D2 discharge pipework to Building Regulations G3.
  7. PaperworkBenchmark checklist and manufacturer warranty registration in the handover folder.
“Replaced a noisy gravity tank in our Brampton sandstone cottage with a 210L Heatrae Sadia Megaflo unvented cylinder. For the first time in 12 years both showers run at full mains pressure at the same time. Neat copper pipework.”
★★★★★Richard Armstrong · Brampton (CA8) · Google review · 03 Aug 2026
Start a cylinder upgrade like this →

How we size cylinders →

Rebuilt Dalston en-suite with a low-profile dark stone resin shower tray, a brass-framed sliding glass screen, a wall-hung WC with a brushed brass flush plate and a slimline oak basin unit beneath a sash window
#job-04En-suite rebuild · The Green, Dalston

#job-04 · En-suite rebuild · CA5 7

The Green, Dalston (CA5 7) — Leaking En-Suite Strip-Out, Re-Tank & Rebuild

Water from a builder-grade en-suite shower had been finding its way into the room below. Behind the tiles: bare plasterboard that had never been tanked.

Total fitted cost
£3,850
Duration
6 working days
Category
En-suite rebuild

Scope breakdown

  1. Strip-outRemoved the failed builder-grade plasterboard shower enclosure back to the studwork.
  2. Joist repairDried out the wet joists, then spliced in new timber where the leak had softened them.
  3. Boards12.5mm waterproof backer board (Schlüter-KERDI-BOARD) on every wall in the shower zone. No plasterboard behind a shower.
  4. TankingSchlüter-KERDI membrane over the boards, every seam taped, then flood-tested for 24 hours before tiling.
  5. Shower trayLow-profile stone resin tray, set level and sealed into the membrane.
  6. Wall-hung WCConcealed Geberit frame with a wall-hung WC and a brushed brass flush plate.
  7. BasinSlimline wall-hung oak basin unit with a brushed brass wall-mounted mixer.
“Our en-suite on The Green had been leaking into the room below for months. Mark found bare plasterboard behind the tiles, stripped it back, re-boarded and tanked it with Schlüter, then flood-tested it before a single tile went on. Bone dry ever since.”
★★★★★Andrew Nicholson · Dalston (CA5) · Google review
Start an en-suite like this →

See the layers we fitted behind the tiles →

Accessible bungalow wetroom with a flush stone floor running into the shower area, frameless glass panels, a linear drain, a fold-down shower seat, grab rails, illuminated stone niches and a wall-hung WC
#job-05Accessible wetroom · Beacon Edge, Penrith

#job-05 · Walk-in wetroom · CA11 8

Beacon Edge, Penrith (CA11 8) — Accessible Bungalow Walk-In Wetroom & High-Flow Upgrade

A bungalow bathroom rebuilt for the long term: no step, no tray lip, and a shower with full flow behind it.

Total fitted cost
£5,650
Duration
8 working days
Category
Walk-in wetroom

Scope breakdown

  1. Zero-step floorFlush stone floor running straight into the shower area, with no step and no tray lip to catch a foot or a wheel.
  2. Tanking & fallsFull-room Schlüter-KERDI tanking on a 1:60 fall, flood-tested for 24 hours before the stone went down.
  3. Linear drainBrushed-brass linear drain along the shower wall, so the whole floor falls one way.
  4. Comfort-height WCWall-hung on a concealed frame at comfort height, with a fold-down support rail beside it.
  5. Illuminated nicheRecessed stone niche with a warm LED strip, so bottles never sit on the floor.
  6. Cool-touch mixerThermostatic cool-touch shower mixer: the body stays safe to touch and the temperature holds steady.
  7. High-flow supplyUpsized the hot and cold runs to the shower valve so the rainfall head runs at full flow.
See level-access & mobility bathrooms →
Brushed brass concealed thermostatic shower valve on a stone-tiled wall, with the rainfall shower running behind the glass and a plumber's tool bag on the floor
#job-06Valve rebuild · Station Road, Dalston

#job-06 · Shower repair · CA5 7

Station Road, Dalston (CA5 7) — Same-Day Concealed Thermostatic Mixer Valve & Cartridge Rebuild

A concealed thermostatic valve that would only run too hot or too cold. Diagnosed and rebuilt the same day, from the front of the valve.

Fixed repair cost
£115
Duration
75 minutes (same-day)
Category
Shower repair
  • 75 minOn site, start to finish
  • 0Wall tiles disturbed
  • £115Fixed price, as quoted

Scope breakdown

  1. DiagnosisDynamic pressure test gauge on the hot and cold supplies, to rule out the supply before touching the valve.
  2. Fault foundA failed thermostatic wax capsule and blocked inlet strainers.
  3. RepairGenuine replacement cartridge from van stock, fitted through the valve face without disturbing a single wall tile.
  4. BalancingCleaned the strainers and balanced the hot and cold check valves, then set a safe maximum temperature.
Book a repair like this →

Shower stopped today? Call 01228 587 745 →

Where they were

Five postcode areas, one team.

Every job on this page was done by Mark and Ryan from Unit 4 Kingstown Broadway, Carlisle, CA3 0HA, beside M6 Junction 44.

Service coverage map of Carlisle and the Eden Valley (CA1 to CA8 and CA11)
Tap an area to see what we usually find there.
CA1–CA3

Carlisle

≈ 1–4 mi · 5–12 min from base

Covers
City centre, Stanwix, Etterby, Belah, Kingstown, Harraby, Botcherby, Denton Holme, Currock, Upperby, Morton
Housing
Victorian and Edwardian red-sandstone and brick terraces, inter-war semis and 1990s–2000s estates.
We often find
Older terraces still running gravity-fed hot water from a loft tank, and timber floors that need ply before a wetroom.
Level-access wetroom in Stanwix: limestone-effect porcelain, frameless glass, brushed brass rainfall shower and a wall-hung oak vanity Check a Carlisle postcode & book →
CA4

Wetheral & Scotby

≈ 5.5–7 mi · 12–16 min from base

Covers
Wetheral, Scotby, Cumwhinton, Warwick Bridge, Great Corby
Housing
Spacious Edwardian and inter-war family houses overlooking the River Eden, plus modern 4-bed estates.
We often find
Builder-grade plasterboard behind shower enclosures that fails after 6–8 years because it was never tanked.
Wetheral family bathroom with a freestanding bath, walk-in rainfall shower and twin-basin oak vanity Check a CA4 postcode & book →
CA8

Brampton & Irthing Valley

≈ 11 mi · 18 min from base

Covers
Brampton, Milton, Talkin, Hayton, Irthington, Hallbankgate, Gilsland
Housing
19th-century red-sandstone cottages on Front Street and Moat Street, and 1970s–80s bungalows off Greenfield Lane.
We often find
Low-pressure loft tanks with long 15mm runs that starve upstairs showers, and timber first floors that need structural ply before porcelain.
210-litre unvented cylinder in a Brampton cottage with clipped copper pipework and a white expansion vessel Brampton, Haltwhistle & Tyne Valley page →
CA11

Penrith & Eden Valley

≈ 22 mi · 25 min via M6 J44 → J40

Covers
Penrith, Stainton, Greystoke, Dacre, Catterlen
Housing
Victorian red-sandstone terraces around Wordsworth Street, bungalows and larger detached houses on the town edge.
We often find
Small original bathrooms, where a level-access wetroom and a wall-hung WC win back floor space.
Accessible bungalow wetroom with a flush stone floor, frameless glass, fold-down seat and illuminated niches Penrith & Eden Valley page →

Town pages

Further out? Each town has its own page and its own jobs.

Different houses, different water and different problems. Each page lists three more completed jobs with postcodes and what the customer paid.

Penrith & Eden Valley · CA10 / CA11Sandstone terraces, weak gravity showers and private water supplies. Keswick & North Lakes · CA12Holiday-let wetrooms and big cylinders for guest houses. Brampton, Haltwhistle & Tyne Valley · CA8 / NE49Cylinders with oil boilers and heat pumps, and warm bathrooms on cold stone walls.

Your project

Want a job like one of these?

Tell us your postcode and what you need. Mark will come back with a fixed written price.

Call 01228 587 745

Mark's mobile rings first · Emergency leaks & cylinder call-outs 7 days, 8am–8pm